scriber

1 A scriber is a piece of steel wire having a hardened sharp point wherewith to draw lines.

2 One end of the scriber is bent, so it can be adapted to enter recesses, or such places as could not be reached by the straight end p.

3 To obtain the half flanges, we take a chuck and face it off true in the lathe; then, with a fine scriber point, we mark the centre while the chuck is revolving.

4 Cutting the notches at a b, acts to let the file clear well when filing the template, and to allow the scriber to go clear into the corner.

5 Mark end by using scriber to assure the inserted length to avoid the pipe of disconnection.

使用画线器在管端画线作记号,以保证管子插入长度,避免造成脱管.

6 The other, interested, gave them a searching once-over before he pushed a small scriber toward Rip.

7 The bent shaft is mounted on the roller for positioning the roller brackets of the laying-out table and scriber pictures circle on the two ends of the bent shaft.

曲轴两端面中心孔的定位方法是，将 曲轴放到该定位划线台滚轮支架的滚轮上，使划针在曲轴两端面上画圆。

8 This paper presents a widely available CO2 laser scriber to perform the direct-writing ablation of poly (methyl methacrylate) (PMMA) substrate for the development of microfluidic chips.

提出一种广泛使用的CO2激光法，以直接读写烧蚀的方式，进行快速的聚甲基丙烯酸甲酯(PMMA)基材的微流控分析芯片的制造。

9 ToList Surface Gage.—The clamp holding the scriber is vertically movable on the pivoted upright.

10 The holes should be drilled through the beam and the plates held against the beam so that their holes may be marked by a scriber passed through the holes in the beam.

11 After the template is marked out, drill the four rivet holes, clamp the template, or pattern, to the sheet iron and mark carefully with a scriber.

12 It can be easily retrofitted to almost any cutting station. The marking stylus easily penetrates most materials. The Scriber is compatible with BURNY Controls and other CNCs as well.

它能够较容易的用于各类切割装置，划线笔较高的材质可轻易的在各种钢板上做标记。可配置在BURNY数控系统或其它数控系统上使用。

13 This will make a spring clamp that is opened to slip over the articles to be clamped together by inserting a scratch awl or scriber between the legs at the bowed portion.

14 In the machining process, often need a bench worker use scriber mark lines on the work piece to determine the processing location and inspection.

在机械加工过程中，经常需要对工件进行钳工划线，以确定加工位置、进行钳工检查。

15 For very small circles the fork scriber shown in Fig.

16 Chewing the scriber and needling his brain, he slowly built up a list of other possibilities.

17 It was currently reported that after each day's hunting Lady Purcell made a house-to-house visitation of conciliation to all sub=162= scribers of five pounds and upwards.

18 The lines drawn upon pattern work require to be very fine, and for this purpose the cutting scriber, Fig.

19 EF Talk Scriber combines a text editor and an audio file player, designed to work like a dictation transcribing machine.

英谈划线结合了文本编辑器和音频文件播放器，设计工作，像一个听写转录机。

20 By resting the base of the surface gage on the line to be measured from, and swinging one point of the scriber to the place where the work is to be done, accuracy is assured.

1 书写者

writer

2 画线器

scribe

3 划线器

marker

4 画线针

scribe