rabbet

1 See separate. joiner, n. link, coupling, bond; woodworker, carpenter. joint, n. gimbal joint, dove-tail joint, joggle joint, mortise joint, miter, dowel, scarf joint, rabbet joint. joint, n. articulation; suture, commissure, knuckle.

2 For those rabbeted incisions, which he suspects in a cone, are made by the inequality of the body, and not of the superficies.

3 The rabbet for install the outer must be H7 tolerance, ensure a high axiality.

工件机壁孔之公差必须为H7，保证内外环较高同轴度。

4 The inner diameter part of the flange at one port of one end of the inner cylinder is provided with a rabbet for splicing with a flange without a rabbet at a corresponding end of an adjacent elbow.

内筒的一端端口法兰内径处设有止口，用于与相邻筒节的对应端无止口法兰插接。

5 With the studs rabbeted at the mill, the carpenter work is reduced to the simple task of sawing the boards and struts to length.

6 A: A framed mirror, which is essentially what you have on your hall rack, typically sits in a rabbet, or groove, that rings the opening.

7 Up and dressed a pease pudding with boyled rabbets and bacon to dinner for want of a cook-mayde, Sarah leaving us at dawn, and he loving it mightily.

8 The back rails should, in addition, be rabbeted for the back board as shown.

9 As with the plow and the rabbet, its shape is ubiquitous.

10 The results show that the fracture mode of blade is vibration fatigue and the main cause of initiation of fatigue crack is the mismatch between rabbet and tongue-and-groove.

结果表明，叶片的断裂模式为振动疲劳，叶片榫头与榫槽配合不当是萌生疲劳裂纹的主要原因。

11 The rabbet plane, made by Carpenter, is traceable via another route, the U.S.

12 Start by cutting the dados and rabbets slightly too narrow and testing the fit.

13 Placed in the frames, they were held in position in the rabbets by laths nailed to the sides so as to prevent any play.

14 Instead of rabbeting the mirror frame, a 1/4 by 3/8-in. fillet of oak is nailed around to form the recess, the walnut frame and oak fillet making a pretty contrast.

15 For the outside rabbet, one piece 1�1 inch, 371/2 long; this nailed to the end of the box forms rabbet for the trays to rest on.

16 The equipment is special equipment for processing the rabbet of two ends of roller steel tube.

该设备系加工拖辊钢管两端止口的专用设备。

17 To join by a rabbet.

通过嵌接的方式连在一起.

18 Historically, shiplap was used in the maritime industry to waterproof ships and keep them afloat due to the rabbet (grooves) cut in the top and bottom of the wood panels.

19 For rabbeting and fillister work the upper holes q are used, while using ploughs the lower ones are brought into requisition.

20 Also unintentional, but pleasing, is the distinctive throat of the rabbet plane—a design that developed to permit easy discharge of shavings, and one that mass manufacture did not destroy.

1 半槽接合

rabbet joint

2 嵌接

scarf table

3 在…上开槽口

notch

4 槽口接缝

rabbet joint

5 凸凹

convexo-concave

6 槽口

check notch dap

7 榫眼

mortise