cogging

1 But while some WebEx employees took their earnings and split — wary of making the transition from fast-growing startup to cog in a Fortune 500 corporation — Yuan stuck around.

2 The effects of stator and rotor eccentricity on the magnetic field distributions, cogging torque and unbalanced force were calculated in this paper by using finite element method (FEM).

采用有限元法计算分析了定子偏心与转子偏心对无刷直流电动机的气隙磁场、定位力矩及单向磁拉力的影响。

3 When cogging effect too big will affect the suspension control of HSMV, thus affecting the normal operation of HSMV.

当齿槽效应比较大时会影响磁浮列车的悬浮控制，从而影响磁浮车的正常运行。

4 Parameters of the induced electromotive force and the electromagnetic torque and so on of the novel motor have been calculated, and it is not difficult to catch the maximum value of cogging torque.

计算了复合电机的感应电动势和电磁转矩，捕捉了齿槽定位转矩的最大值等电机参数。

5 Based on three dimensional finite element analyses of magnetic fields, the cogging torque of a prototype motor is calculated using the virtual work and Maxwell stress tensor methods.

在电机内磁场三维有限元数值分析的基础上，采用虚位移和麦克斯韦张量两种不同的方法计算了电机的脉动转矩。

6 But in PMLSM, there are end effect, cogging force and ripple disturbance which confine its application as high accuracy numerical control machine.

但系统中存在端部效应、齿槽效应、纹波效应等推力波动，限制了其在高精度数控机床等要求高性能领域的应用。

7 A cogging torque measurement system was proposed , which was composed of stepping motor, torque sensor, etc.

提出了一种由步进电机 、 转矩传感器等元件组成的齿槽转矩测试系统.

8 The cogs don't quite mesh.

这些轮齿啮合不严。

9 It is found that if the slot number per pole is not an integer, new lower harmonics of cogging torque may be introduced when PM shifting is adopt.

因此要通过磁极偏移减小齿槽转矩，除了减小永磁体对称时存在的齿槽转矩谐波外，还要减小新引入的低次谐波。

10 The effects of different combinations of slot number and pole number on cogging torque are also investigated. The study shows that the cogging torque could be gr…

研究表明，采用偏心磁极结构可有效地削弱齿槽转矩，而对每极磁通影响较小，本文提出的方法是有效的。

11 The first stage is called primary rolling, or cogging.

这个阶段叫作初轧或开坯。

12 The accurate calculation of cogging torque assists in optimizing the design of claw pole permanent magnet synchronous motors.

脉动转矩的准确计算是爪极永磁同步电动机优化设计的基本前提之一。

13 The design and construction of fold and directional blastings for demolition of an office building and water tower in the Second Cogging mill of Anshan Steel and Iron Corp. are expounded.

阐述了折叠爆破和定向爆破拆除鞍钢第二初轧厂办公楼和水塔的设计和施工。

14 Because of the differences on structure and operational principle, the ways of reducing cogging torque in DSPM is different from other permanent magnet motor.

与其他永磁电机相比，由于结构和运行原理的不同，双凸极永磁电机齿槽转矩的削弱方法也有所不同。

15 The stator cogging effect is usually ignored when we calculate generator magnetic field by air gap permeance method, which lead to the generator fault information missing.

采用气隙磁导法计算发电机磁场时通常忽略定子齿槽效应，漏掉了发电机的故障信息。

16 They are also preferred in applications where no cogging and minimal torque ripple is important.

他们也应用于无波动或最小转矩脉动领域。

17 A cogging torque measurement system was proposed, which was composed of stepping motor, torque sensor, etc.

提出了一种由步进电机、转矩传感器等元件组成的齿槽转矩测试系统。

18 I began to tell Cog, but he didn't listen to me.

我试着眼高格说，可他根本不听我的。

19 The calculation formula of the cogging torque are derived by the Fourier decomposition and the virtual displacement method.

利用傅里叶分解及能量虚位移法，推导了磁阻转矩的计算公式。

20 There are two causes or cogging force in linear permanent magnet motors, resulting from the slotting and the finite length of the iron-cored.

永磁直线电机的定位力是由铁心开槽及铁心的有限长产生的。

1 接头

joint bond terminal bend connector adapter junction splice piece nose-piece