kerf

1 New clamping systems, low noise tooling, thin kerf saw blades, update cutters and their application were introduced in the paper.

本文将着重阐述刀具装夹、低噪声刀具、薄锯路圆锯片、新型刀具及应用。

2 The novel ring is characterized in that a kerf is arranged on the original ring, and the primary snap ring and the secondary snap ring are arranged at two ends of the kerf.

本实用新型提供一种由戒指和子母扣环组成的新型戒指环，其特征是：在原有的戒指上设置断口，断口两端设置有子母扣环。

3 The drawer front is placed in the vice, and the drawer side held upon it, whilst the saw blade is placed in the saw kerf and drawn smartly forward.

4 After you have chopped the two kerfs in a tree, you will know when it is about to fall by the creaking and the slight movement of its top.

5 Laser cutting head coming with automatic touching system, adapt to the jagged materials and keep cutting kerf precision.

激光切割头配有自动高度跟随系统，适应材料高低不平，保证切割刀缝一致。

6 “Why, then it will cut a wide kerf,” said Raymond, “and so the back will follow in easily.”

7 This is achieved by using a unique multi beam technology, demonstrated in figure 2, which reduces the power density, minimizes the thermal load, and reduces the kerf width in the wafer.

这是采用独特的多光束技术实现的，图2显示了其工作原理，降低了功率密度，减小了热负载，缩小了刻线宽度。

8 Mark the kerf on the end grain of a post.

9 with a handsaw I made a kerf in the board to mark where I needed to cut

10 The side is held in position on the end, and the dovetail saw is inserted and drawn out of the saw kerf, thus leaving the exact mark on the drawer-back.

11 If the saw binds and buckles because of the springing together of the wood, the kerf may be wedged open with a screwdriver or a bit of waste wood.

12 Make the first pass on all four posts, adjust the saw’s fence, and then make additional passes until the kerfs are formed.

13 The results show that kerf width decreases with pulse frequency increases under the same average power and pulse width.

结果表明，当平均功率和脉冲宽度相同时，切缝宽度随着脉冲频率的增大而减小；

14 Starting saw blade against material to be cut or forward into kerf can result in kickback.

锯齿靠着被切割的材料启动或者启动中推入锯口会导致反冲(后坐).

15 Until the kerf is well started, the saw should be held so that the teeth just touch the wood.

16 Range of kerf width and exposure may be changed for optimized performance.

一系列的切缝宽度和曝光可能会改为优化的表现。

17 At last, the authors regard that variable parameters are necessary for people to adopt in order to obtain a uniform kerf width for thin seamless steel pipe with a small diameter.

最后提出，为了获得均匀宽度的圆周切缝，对于薄壁小管径无缝钢管激光切缝，应采取变工艺参数的措施。

18 Then as the saw is gradually lowered, the kerf will extend quite across the wood, Fig.

19 The effects of laser process parameters on kerf width and quality were studied.

系统研究了工艺参数对切缝宽度和切缝质量的影响规律。

20 Into each saw kerf a wedge is inserted and the joint glued up.

1 切痕

cut incision Nick discontinuity

2 截面

section cross section cross-section sectional edge

3 截口

section

4 切口

cut notch incision Scotch lingo gash cant

5 劈

cut hack chop hew whack hag carbonado

6 割痕

cut score gash

7 截

field